LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Locks (Service Information) >> Switch, Deck Lid Release >> Removal >> Deck Lid

Deck Lid

  1. Disconnect and isolate the battery negative cable.
  2. Remove the Center High Mounted Stop Lamp (CHMSL) unit from the deck lid. Refer to LAMP, CENTER HIGH MOUNTED STOP, REMOVAL .
    GC0170666Courtesy of CHRYSLER GROUP, LLC
  3. Disengage the deck lid release switch connector (1) and pigtail wire harness from the retention features on the back of the CHMSL housing.
  4. Firmly grasp the tabs of the deck lid release switch mounting flange (2) on the back of the CHMSL housing and rotate it counterclockwise about 30 degrees to unlock it.
  5. Pull the switch straight out from the clearance hole through the back of the CHMSL housing.