Deck Lid
- Align the deck lid release switch with the clearance hole in the back of the Center High Mounted Stop Lamp (CHMSL) unit housing.
- Insert the switch straight into the clearance hole through the back of the CHMSL housing until the switch mounting flange (2) is firmly seated against the CHMSL housing.
- Rotate the switch clockwise about 30 degrees to lock it into place.
- Engage the deck lid release switch connector (1) and pigtail wire harness with the retention features on the back of the CHMSL housing.
- Reinstall the CHMSL unit into the deck lid. Refer to LAMP, CENTER HIGH MOUNTED STOP, INSTALLATION .
- Reconnect the battery negative cable.
