Antenna, Satellite, Audio: Installation
- Insert the antenna pigtail wiring through the mounting hole from the outside of the vehicle then position the antenna onto the outer roof panel.
- Position the spring retainer to the antenna body (3) then install and tighten the screw securely.
- Use hand pressure to press the antenna down into the mounting hole until the spring retainer snaps into position on the inner roof panel.
- Reach between the headliner and the inner roof panel to access and connect the antenna pigtail wiring connectors (1) to the body wire harness connectors.
- Reinstall the headliner onto the inner roof panel. Refer to HEADLINER, INSTALLATION .
- Reinstall the rear seat back into the vehicle. Refer to SEAT BACK, REAR, INSTALLATION .
- Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.