LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Audio/Video/Entertainment/Connectivity (Service Information) >> Module, Radio Antenna >> Removal >> Capacitor

Module, Radio Antenna: Removal: Capacitor

GC0170609Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative cable from the battery. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector before disconnecting the negative cable from the battery.
  2. Remove the trim from the upper right C-pillar (1). Refer to PANEL, C-PILLAR TRIM, REMOVAL .
  3. Disconnect the body wire harness connector (4) from the antenna capacitor (5).
  4. Remove the screw (6) that secures the antenna capacitor to the C-pillar.
  5. Disengage the mounting tab of the antenna capacitor from the slotted hole in the C-pillar (1) and remove the capacitor from the vehicle.
scientia non olet · About LEMON Manuals