LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Audio/Video/Entertainment/Connectivity (Service Information) >> Speaker >> Installation >> Shelf Panel

Shelf Panel

GC0170821Courtesy of CHRYSLER GROUP, LLC
GC0170602Courtesy of CHRYSLER GROUP, LLC
  1. Position the speaker (2) near the mounting hole in the package shelf panel support.
  2. Reconnect the wire harness connector (1) to the speaker.
  3. Position the speaker into the mounting hole of the shelf panel support.
  4. Install and tighten the four screws (3) that secure the speaker to the shelf panel support. Tighten the screws securely.
  5. Reinstall the trim onto the shelf panel support. Refer to PANEL, REAR SHELF, INSTALLATION .

    Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.

scientia non olet · About LEMON Manuals