LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Audio/Video/Entertainment/Connectivity (Service Information) >> Speaker >> Installation >> Subwoofer - Trunk

Subwoofer - Trunk

GC0170722Courtesy of CHRYSLER GROUP, LLC
  1. Position the subwoofer assembly (5) into the trunk.
  2. Align and engage the locating tab on the base of the subwoofer enclosure with the slotted bracket (4) on the right side floor panel of the trunk.
  3. Pull the top bracket of the subwoofer assembly back from the trunk side panel far enough to access and reconnect the body wire harness connector (3) to the connector receptacle on the back of the subwoofer enclosure.
  4. Install and tighten the hold down retainer (1) that secures the top bracket of the subwoofer assembly to the U-nut (2) in the right trunk side panel.
  5. Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), reconnect the IBS connector.
scientia non olet · About LEMON Manuals