LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Electronic Control Modules (Service Information) >> Module, Electronic Shift (ESM) >> Removal >> Gearshift Lever - Instrument Panel Mounted Removal

Gearshift Lever - Instrument Panel Mounted Removal

  1. Place the shifter in PARK
  2. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0095837Courtesy of CHRYSLER GROUP, LLC
  3. Remove the gearshift cable retaining clip (4) (if equipped).
  4. Disconnect the gearshift cable (1) from the shift lever (3), and remove cable from bracket (2).
  5. Lower the vehicle.
  6. Remove the instrument panel bezel (Refer to BEZEL, INSTRUMENT CLUSTER .
  7. Remove the instrument panel kneeblocker panel (Refer to COVER, STEERING COLUMN OPENING .
    GC0162390Courtesy of CHRYSLER GROUP, LLC
  8. Disconnect the gearshift lever electrical connector.
    GC0162382Courtesy of CHRYSLER GROUP, LLC
  9. Remove the gearshift lever screw and pull the gearshift lever out of the shifter assembly.
    NOTE:

    The gearshift lever will remain in the vehicle.

    GC0162399Courtesy of CHRYSLER GROUP, LLC
  10. Disconnect the gearshift cable end (1) from the shifter assembly, pull the gearshift cable bracket lock (2) outward and remove the gearshift cable from the shifter assembly bracket (3).
    GC0095832Courtesy of CHRYSLER GROUP, LLC
  11. Remove the gearshift cable grommet (3) from the opening in the dash panel (4), and remove the gearshift cable.
scientia non olet · About LEMON Manuals