Reservoir, Brake Master Cylinder: Installation
- Install NEW
brake fluid reservoir sealing grommets (2) in master cylinder housing (1).
- Lubricate reservoir mounting area with fresh clean brake fluid. Place reservoir in position over sealing grommets. Seat reservoir into sealing grommets using a rocking motion while firmly pressing down on fluid reservoir. Once installed, make sure fluid reservoir is touching the top of both sealing grommets (2) or reservoir is not properly installed.
- Install and tighten the brake fluid reservoir to master cylinder bolt (3).
- Install the brake master cylinder and brake master cylinder reservoir assembly. Refer to MASTER CYLINDER, BRAKE, INSTALLATION .
