LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires & Wheels (Service Information) >> Installation >> Tire And Wheel Assembly (Aluminum Wheel)

Tire And Wheel Assembly (Aluminum Wheel)

WARNING:

Installing wheels without good metal-to-metal contact with the mounting surface could cause loosening of the wheel mounting (lug) nuts. This could adversely affect the safety and handling of the vehicle.

NOTE:

Never use oil or grease on studs or wheel mounting (lug) nuts.

NOTE:

Clean wheel mounting surfaces, removing any build-up of corrosion. It is important to have good metal-to-metal contact between wheel and vehicle.

  1. Install the tire and wheel assembly on the hub and lightly snug all five wheel mounting (lug) nuts. Do not tighten at this time. 
  2. Progressively tighten wheel mounting (lug) nuts, in a star pattern, to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  3. If applicable, install wheel center cap (4).
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals