Torque Specifications
TORQUE SPECIFICATIONS
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. | NEW FASTENER* |
|---|---|---|---|---|
| Drive Shaft to Transmission Flange Bolts | 66 | 49 | - | X |
| Drive Shaft to Rear Axle Flange Bolts | 66 | 49 | - | X |
| Center Bearing to Body Bolts | 28 | 21 | - | X |
| Front Drive Shaft to Axle/Transfer Case Flange Bolts/Nuts | 61 | 45 | - | X |
| Exhaust Heat Shield Fastener Nuts | 11 | 8 | - | X |
| Exhaust Heat Shield Fastener Bolt | 12 | 9 | - | X |
| *NEW FASTENER:
Do not reuse these fasteners. If removed, a new fastener must be installed and tightened to specifications. If NEW bolts/nuts are not available clean the old bolts/nuts and apply Mopar® Lock and Seal Adhesive or equivalent. |
||||