LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft >> Removal >> Front Drive Shaft

Front Drive Shaft

  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0152202Courtesy of CHRYSLER GROUP, LLC
  2. Raise the transmission slightly with a transmission jack (1) to relieve load on the crossmember.
    GC0152195Courtesy of CHRYSLER GROUP, LLC
  3. Remove the crossmember bolts (1), the transmission mount bolts (2) and remove the crossmember.
    GC0094956Courtesy of CHRYSLER GROUP, LLC
  4. Index mark the drive shaft to transfer case flange and the drive shaft to front axle flange.
  5. Remove and discard four front drive shaft to front axle flange bolts (2).
  6. Remove and discard four front drive shaft to transfer case flange bolts (2).
  7. Remove drive shaft assembly (1).
scientia non olet · About LEMON Manuals