3.6L/5.7L Dual Muffler
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Apply penetrating oil to band clamps.
- Remove the catalytic converter to muffler/resonator (1) clamps (2).NOTE:
The right side resonator is part of the muffler assembly and must be replaced with the mufflers.
- Remove left side resonator and tailpipe assembly flange nuts (3).
- Remove the front isolator mounting bolt (1).
- Remove both rear isolator mounting bolts (1).
- Remove the muffler and tailpipe assembly by twisting/turning while pulling assembly out of catalytic converters.
