Inner Tie Rod

Remove outer tie rod. Refer to TIE ROD, STEERING, REMOVAL .
Remove tie rod jam nut from inner tie rod.

Courtesy of CHRYSLER GROUP, LLC
Remove clamp (1) securing bellows (3) to inner tie rod.
Remove clamp (2) securing bellows (3) to steering gear body.
Remove bellows (3).

Courtesy of CHRYSLER GROUP, LLC
Install the (special tool #10417, Holder, EPS Steering Rack) (1) on the LH inner tie rod. Using a suitable tool (2), remove the inner tie rod.
CAUTION:
If inner tie rod cannot be removed using specified tools, do not use a hammer or heat to loosen. Damage to steering gear will occur. Replace entire steering gear.
Unthread and remove inner tie rod (2).

Courtesy of CHRYSLER GROUP, LLC
Remove travel restrictor (2) from rack gear (3).