LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Steering >> Steering Linkage >> Steering System >> Pump >> Removal >> Electro-Hydraulic Power Steering

Electro-Hydraulic Power Steering

  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Raise and support vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  3. Remove the right front tire and wheel assembly. Refer to REMOVAL .
  4. Remove right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL .
    GC0144516Courtesy of CHRYSLER GROUP, LLC
  5. Siphon power steering fluid from pump reservoir (4).
  6. Disconnect electrical connectors (1) from Electro Hydraulic Power Steering (EHPS) pump body (3).
  7. Remove power steering pressure line bolt (2) and position the pressure line away from the EHPS pump.
    GC0144528Courtesy of CHRYSLER GROUP, LLC
  8. Remove EHPS pump bracket (1) mounting bolts (2).
    GC0144527Courtesy of CHRYSLER GROUP, LLC
  9. Remove EHPS pump bracket retaining nut (4) and remove the EHPS pump (1) from the vehicle.
scientia non olet · About LEMON Manuals