Fascia, Front: Installation
- Carefully position the front fascia (2) onto the vehicle, aligning fender the studs as seating it fully.
- Hand tap the front fascia to engage the fender retaining clips.
- Install the fascia to fender screws and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS
.
- Connect the marker light electrical connectors (1).
- Connect the fog lamp electrical connectors (1).
- Install the front wheelhouse splash shields. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
- Install the belly pans. Refer to BELLY PAN, INSTALLATION .
- Install the upper fender to fascia bolts (1) on each side and tighten to the proper torque specifications. Refer to TECHNICAL SPECIFICATIONS
.
- Install the 12 front upper push pin fasteners (1).
