Fascia, Rear: Installation
- With the help of an assistant, position the fascia to the vehicle.
- With the help of an assistant and using firm pressure, align and push forward to engage the fascia to the rear retaining bracket (1).
- Align the fascia with the retaining bracket (2) on each side in the tail light housing and using firm pressure push in to engage.
- Align the fascia with the retaining brackets (3) on each quarter panel and using firm pressure push in to engage.
- Install the taillamp. Refer to LAMP, TAIL STOP TURN, INSTALLATION
.
- Install the fasteners (3) that secures the rear fascia assembly to the rear fascia support bracket.
- Install the fastener (1) that secures the rear fascia assembly to the rear quarter. Tighten the fastener securely.
- Connect the marker light electrical connectors.
- Install the three push-pin retainers that secure each rear wheel house splash shield to the rear fascia assembly.
- Connect the negative battery cable.
