LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Bumpers >> Under Body Protection >> Shield, Rear Mount >> Installation

Shield, Rear Mount: Installation

GC0145105Courtesy of CHRYSLER GROUP, LLC
  1. Position the rear underbody shield/panel (1) to the vehicle.
  2. Install the three retaining nuts (2) that secure the underbody shield (1) to the vehicle underbody. Tighten the nuts securely.
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals