Hub And Bearing: Installation: RWD
NOTE:
Installation process is the same for both sides of the vehicle.
NOTE:
Prior to installation, inspect magnetic encoder (for wheel speed sensor) (2) for any damage and make sure any metal debris sticking to it is removed.
- Slide hub and bearing (2) into the knuckle (1).
- Install the three front hub and bearing mounting bolts (4), and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
- Install the front brake hose support bracket and bolt (1).
- Install the front brake rotor
Refer to ROTOR, BRAKE, INSTALLATION .
- Install the tire and wheel assembly. Refer to INSTALLATION .
- Remove the support and lower the vehicle.
