Transmission Fill

To avoid overfilling transmission after a fluid change or overhaul, perform the following procedure:

1. Verify that the vehicle is parked on a level surface.
2. Remove the dipstick tube cap.
3. Add following initial quantity of Mopar® ATF +4, Automatic Transmission Fluid, to the transmission:
   1. If only fluid and filter were changed, add 5.0 L (10.6pts.)  of transmission fluid to transmission.
   2. If the transmission was completely overhauled or the torque converter was replaced or drained, add 7.7 L (16.3 pts.)  of transmission fluid to transmission.
4. Check the transmission fluid and adjust as required. Refer to FLUID AND FILTER, STANDARD PROCEDURE .