Heated Glass (Service Information): Description
CAUTION:
Grid lines can be damaged or scraped off with sharp instruments. Care should be taken in cleaning glass or removing foreign materials, decals or stickers. Normal glass cleaning solvents or hot water used with rags or toweling is recommended.
- The rear window defogger system, also known as the Electric Back Light (EBL), consists of two vertical bus bars (1) linked by a series of grid lines (2) fired to the inside surface of the rear window (3).
- The EBL system is turned ON or OFF by a momentary switch located in the Integrated Center Stack (ICS), or by using the control located in the Uconnect® touchscreen module. Refer to SWITCH, DEFOGGER, DESCRIPTION .
- Circuit protection is provided by a fuse in the Power Distribution Center (PDC).