Center Panel

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Take the proper precautions to protect the face of instrument panel center bezel from cosmetic damage while performing this procedure.

Position each air outlet (2) to the instrument panel center bezel (4).
Engage the four retaining tabs (1 and 3) that secure each air outlet to the center bezel. Make sure the retaining tabs are fully engaged to the outlet.
NOTE:
Make sure that the air outlets are properly aligned to the ducts within the instrument panel and that the foam seals on the outlets are properly installed.
Install the instrument panel center bezel. Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
Connect the negative battery cable.