LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System (Service Information) >> Capacitor, Ignition >> Installation >> 3.6L

Capacitor, Ignition: Installation: 3.6L

GC0144203Courtesy of CHRYSLER GROUP, LLC
  1. Install the ignition capacitor (2). Tighten bolt (3) to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  2. Connect the ignition capacitor wire harness connector (1).
  3. Install the engine cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals