Sensor, Air Temperature, Inlet: Installation: 3.6L

Courtesy of CHRYSLER GROUP, LLC

1. The Inlet Air Temperature (IAT) sensor O-ring seal (2) can be reused if not damaged.
2. Clean the IAT sensor mounting hole in the air inlet hose.
3. Install the IAT sensor into the air inlet hose and rotate clockwise until the release tab (3) engages.

   Courtesy of CHRYSLER GROUP, LLC

4. Install the IAT sensor wire harness connector (1).

   Courtesy of CHRYSLER GROUP, LLC

5. Install the engine cover (1).
6. Connect the negative battery cable.