LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection, Gas >> Sensor, Manifold Air Pressure (Map) >> Installation >> 5.7L

Sensor, Manifold Air Pressure (Map): Installation: 5.7L

  1. Clean MAP sensor mounting hole at intake manifold.
  2. Check MAP sensor O-ring seal for cuts or tears.
  3. Install and rotate the MAP sensor 1/4 turn clockwise.
    GC0092267Courtesy of CHRYSLER GROUP, LLC
  4. Connect and lock the MAP sensor wire harness connector (1).
scientia non olet · About LEMON Manuals