Sensor, Oxygen: Installation: 6.4L: Upstream

The threads of the new oxygen sensors are factory coated with anti-seize compound to aid in removal. Do not add any additional anti-seize compound to threads of a new oxygen sensor. 

Courtesy of CHRYSLER GROUP, LLC

1. Install the oxygen sensor (1) into the exhaust manifold and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
2. Connect the oxygen sensor wire harness connector (2) and secure the wire harness in the retainer (3).
3. Remove support and lower the vehicle.
4. Connect the negative battery cable.