LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Engine Block >> Retainer, Crankshaft Rear Oil Seal >> Removal

Retainer, Crankshaft Rear Oil Seal: Removal

Fig 1: Rear Seal Retainer Loosening/Tightening Sequence
GC0081773Courtesy of CHRYSLER GROUP, LLC
NOTE:

The crankshaft rear oil seal is integral to the crankshaft rear oil seal retainer and must be replaced as an assembly.

NOTE:

The crankshaft rear oil seal retainer can not be reused after removal.

NOTE:

This procedure can be performed in vehicle.

  1. Disconnect the negative battery cable.
  2. On automatic transmission models, remove the flexplate. Refer to FLEXPLATE  .
  3. On manual transmission models, remove the flywheel .
  4. Remove the oil pan. Refer to PAN, OIL, REMOVAL  .
  5. Using the sequence shown, remove the rear oil seal retainer mounting bolts.
  6. Carefully remove the retainer from the engine block.
scientia non olet · About LEMON Manuals