LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Engine Mounting >> Insulator, Engine Mount, Front >> Removal >> AWD >> Engine Mount Isolators

Engine Mount Isolators

  1. Disconnect and isolate the negative battery cable.
  2. Remove the Variable Valve Timing Solenoid (VVTS). Refer to SOLENOID, VARIABLE VALVE TIMING (VVTS), EXHAUST, REMOVAL  .
  3. Remove the engine oil dipstick tube retaining nut at the right exhaust manifold and remove the dipstick tube.
  4. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
  5. Remove both left/right front axle half shafts from the vehicle. Refer to REMOVAL .
    GC0170598Courtesy of CHRYSLER GROUP, LLC
  6. Remove the generator support bracket to engine mount isolator retaining nut (1).
  7. Remove the generator support bracket retaining bolt (2) and remove the support bracket.
  8. Remove the engine oil filter. Refer to FILTER, ENGINE OIL  .
  9. Lower the vehicle.
    GC0170678Courtesy of CHRYSLER GROUP, LLC
  10. Remove the right engine mount isolator heat shield retaining nut (1) and remove the heat shield (2).
    GC0170686Courtesy of CHRYSLER GROUP, LLC
  11. Remove the left side isolator heat shield retaining nuts (1) and remove the heat shield.
    GC0170775Courtesy of CHRYSLER GROUP, LLC
  12. Remove the left side engine mount isolator to engine cradle retaining bolts (1).
    GC0170691Courtesy of CHRYSLER GROUP, LLC
  13. Remove the right side engine mount isolator to engine cradle retaining bolts (1).
    GC0094863Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Do not use air tools to install the engine lift fixture.

  14. Install the Engine Lift Fixture (special tool #8984B, Fixture, Engine Lifting) (1), Engine Lift Adapter (special tool #8984-UPD, Adapter, Engine Lift) (2) and the Engine Support Fixture (special tool #8534C, Fixture, Driveline Support) (3).
  15. Raise the engine to provide enough clearance to remove the engine mounts.
    GC0170654Courtesy of CHRYSLER GROUP, LLC
  16. Remove the left side engine mount isolator retaining bolts (1) and remove isolator (2).
    GC0170778Courtesy of CHRYSLER GROUP, LLC
  17. Remove the right side engine mount isolator retaining bolts (2) and remove the isolator (1).
scientia non olet · About LEMON Manuals