LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Lubrication >> Cooler And Lines, Oil >> Installation

Cooler And Lines, Oil: Installation

  1. Replace the oil cooler seal.
  2. Lubricate the seal and position the oil cooler to the oil filter adapter, aligning notch to tab.
  3. Install the oil cooler connector bolt. Tighten the connector bolt to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  4. Install the oil filter.
  5. Connect the oil cooler coolant hoses.
  6. Lower the vehicle.
  7. Fill the cooling system. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals