LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Manifolds >> Manifold, Intake >> Removal

Manifold, Intake: Removal

  1. Perform the fuel system pressure release procedure. Refer to FUEL DELIVERY, GAS, STANDARD PROCEDURE .
  2. Disconnect and isolate the negative battery cable.
  3. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL  .
  4. Disconnect the fuel supply line. Refer to FITTING, QUICK CONNECT, STANDARD PROCEDURE .
  5. Disconnect the brake booster hose and the EVAP purge line.
    Fig 1: Intake Manifold Removal & Tightening Sequence
    GC0095568Courtesy of CHRYSLER GROUP, LLC
  6. Disconnect the following components wire harness connectors:
    • Manifold Absolute Pressure (MAP) Sensor
    • Fuel Injectors
    • Electronic Throttle Control (ETC).
  7. Using the sequence shown, remove bolts and the intake manifold.
scientia non olet · About LEMON Manuals