Standard Procedure - Fluid Drain And Fill

Drive the vehicle until the differential lubricant is at the normal operating temperature.
NOTE:
The vehicle must be LEVEL .
Raise and support the vehicle and hold vehicle at curb position. Refer to HOISTING, STANDARD PROCEDURE .

Courtesy of CHRYSLER GROUP, LLC
Remove the rear axle drain plug (1) and drain the lubricant completely from the axle.
Install the rear axle drain plug (1) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .

Courtesy of CHRYSLER GROUP, LLC
Remove the rear axle fill plug (1) and fill the rear axle with the specified amount of fluid. Refer to CAPACITIES AND RECOMMENDED FLUIDS, SPECIFICATIONS .
Install the rear axle fill plug (1) and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .