LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Emissions Control >> Evaporative Emissions >> Solenoid, Evaporative Emissions Purge >> Removal >> 6.4L

Solenoid, Evaporative Emissions Purge: Removal: 6.4L

GC0177134Courtesy of CHRYSLER GROUP, LLC
NOTE:

The EVAP purge solenoid attaches to a bracket near the right rear of the engine. The solenoid will not operate unless it is installed correctly.

  1. Disconnect and isolate the negative battery cable.
  2. Disconnect the EVAP purge solenoid wire harness connector (3).
  3. Disconnect the purge line (1) from the EVAP purge solenoid.
  4. Disengage the purge hose (4) from the EVAP purge solenoid.
  5. Remove the EVAP purge solenoid (2) from the bracket.
scientia non olet · About LEMON Manuals