LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Emissions Control >> Evaporative Emissions >> Solenoid, Evaporative Emissions Purge >> Installation >> 5.7L

Solenoid, Evaporative Emissions Purge: Installation: 5.7L

GC0158417Courtesy of CHRYSLER GROUP, LLC
  1. Slide the EVAP purge solenoid (2) onto the mounting bracket until the locking tab click/locks into position.
  2. Connect the vacuum lines (1) at the throttle body.
  3. Connect the vapor line (4).
  4. Connect the electrical connector (3) at the canister purge solenoid.
  5. If removed, install the engine cover.
scientia non olet · About LEMON Manuals