LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Starter >> Starting System (Service Information) >> Antenna, Remote Start >> Installation

Antenna, Remote Start: Installation

GC0144685Courtesy of CHRYSLER GROUP, LLC
  1. Mount the remote start antenna (4) to the mounting bracket.
  2. Install the antenna and mounting bracket into the structural support rib.
  3. Install the remote start harness (3) to the driver side D-pillar.
  4. Connect the remote start antenna (1) to the RF Hub module jumper wire (2) located on the D-pillar.
  5. Install the headliner. Refer to HEADLINER, INSTALLATION .
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals