MPR Cable
WARNING: This page is about a different variant/trim than selected.
- Disconnect and isolate the negative battery cable.
- Apply the parking brake.
- Remove the Manual Park Release (MPR) lever cover.
- Disconnect the MPR cable (1) from the housing (2), while holding the release tab (3) open.
- Disconnect the MPR cable from the lever.
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE
.
- Disconnect the MPR cable (1) from the MPR lever (2).
- Remove the MPR cable bracket bolts (1) and remove the MPR cable (2) from the vehicle.
