Camshaft Core Hole Plug

WARNING: This page is about a different variant/trim than selected.

Courtesy of CHRYSLER GROUP, LLC

Perform the fuel system pressure release procedure. Refer to FUEL DELIVERY, GAS, STANDARD PROCEDURE .
Remove the engine from the vehicle. Refer to REMOVAL .
On automatic transmission models, remove the flexplate. Refer to FLEXPLATE, REMOVAL .
On manual transmission models, remove the flywheel .
CAUTION:
Do not damage the rear surface of the camshaft or the core plug sealing surface, when removing the core plug.
Using a suitable sharp punch, punch a small hole in the camshaft core hole plug (1).
Insert a short sheet metal screw into the small hole in the camshaft core hole plug.
Using a suitable slide hammer puller, remove the rear camshaft core hole plug.