LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (6.2L Engine (Service Information)) >> Engine Mounting >> Insulator, Engine Mount, Rear >> Removal >> Automatic Transmission

Automatic Transmission

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
    GC0170414Courtesy of CHRYSLER GROUP, LLC
  2. Using a suitable jack, support the transmission.
  3. Remove the rear transmission mount isolator bolts (2).
  4. Remove the rear cross member retaining bolts (1, 3) and remove the cross member.
    GC0170313Courtesy of CHRYSLER GROUP, LLC
  5. Remove the rear transmission mount isolator retaining bolts (1) and remove the isolator.
    GC0170582Courtesy of CHRYSLER GROUP, LLC
  6. If required, remove the rear transmission mount bracket retaining bolts (1) from the transmission and remove the bracket.
scientia non olet · About LEMON Manuals