LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (6.2L Engine (Service Information)) >> Supercharger System >> Pulley, Idler >> Installation >> Lower

Pulley, Idler: Installation: Lower

WARNING: This page is about a different variant/trim than selected.
GC0170234Courtesy of CHRYSLER GROUP, LLC
  1. Using a NEW  bolt (1) coated with red loctite®, install the idler pulley and tighten the bolt (1) to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Install the supercharger drive belt (2). Refer to BELT, DRIVE, INSTALLATION .
  3. Install accessory drive belt. Refer to BELT, SERPENTINE, INSTALLATION, 6.2L .
scientia non olet · About LEMON Manuals