Lifter(S), Hydraulic: Removal

WARNING: This page is about a different variant/trim than selected.

NOTE:

The LH cylinder head hydraulic lifters are shown, the RH cylinder head hydraulic lifters are similar.

Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
Remove the camshaft(s). Refer to CAMSHAFT, ENGINE, REMOVAL .
NOTE:
If the rocker arms are to be reused, identify their positions so that they can be reassembled into their original locations.
Remove the rocker arm(s). Refer to ROCKER ARM, VALVE .

Courtesy of CHRYSLER GROUP, LLC

NOTE:
If the hydraulic lifters are to be reused, identify their positions so that they can be reassembled into their original locations.
Remove the hydraulic lifter(s) (1).