LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (6.4L Engine (Service Information)) >> Engine Mounting >> Insulator, Engine Mount, Rear >> Installation >> Automatic Transmission

Automatic Transmission

WARNING: This page is about a different variant/trim than selected.
GC0080320Courtesy of CHRYSLER GROUP, LLC
  1. If removed, position the rear transmission mount bracket (2) to the transmission and tighten the retaining bolts to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Position the rear transmission mount isolator (3) to the rear transmission mount bracket, install the retaining bolts (1) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
    GC0095619Courtesy of CHRYSLER GROUP, LLC
  3. Position the transmission crossmember (4), install the retaining bolts (1, 3) finger tight.
  4. Install the rear transmission mount isolator retaining bolts (2) finger tight.
  5. Tighten the transmission crossmember retaining bolts (1, 3) to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  6. Lower the transmission and remove the jack.
  7. Tighten the rear transmission mount isolator retaining bolts (2) to the proper specification. Refer to TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals