LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (6.4L Engine (Service Information)) >> Engine Mounting >> Insulator, Engine Mount, Rear >> Installation >> Manual Transmission

Manual Transmission

WARNING: This page is about a different variant/trim than selected.
GC0144616Courtesy of CHRYSLER GROUP, LLC
  1. Install the rear transmission mount isolator (2). Tighten the bolts (1) to the proper specification. Refer to TORQUE SPECIFICATIONS  .
    GC0170287Courtesy of CHRYSLER GROUP, LLC
  2. Install the rear cross member and tighten bolts (1) finger tight.
  3. Install the rear transmission mount isolator nuts (2) and tighten finger tight.
  4. Tighten the transmission crossmember bolts to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  5. Lower the transmission and remove the jack.
  6. Tighten the rear transmission mount isolator retaining nuts to the proper specification. Refer to TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals