Audio/Video/Entertainment/Connectivity (Service Information): Amplifier: Installation

Courtesy of CHRYSLER GROUP, LLC

1. If the audio power amplifier is being replaced with a new unit, transfer the three mounting screws from the old amplifier to the new one.
2. Position the amplifier (2) to the vertical bracket of the support structure under the instrument panel.
3. Engage the three screws that secure the amplifier into the keyed holes of the instrument panel support structure.
4. Tighten the screws securely.
5. Reconnect the wire harness connectors (1 and 3) to the amplifier.
6. If equipped, reinstall the Transmission Control Module (TCM) onto the instrument panel support structure. Refer to MODULE, TRANSMISSION CONTROL (TCM), INSTALLATION .
7. Reinstall the steering column opening cover onto the instrument panel. Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
8. Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.