LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Audio/Video/Entertainment/Connectivity (Service Information) >> Module, Radio Antenna >> Installation >> Capacitor

Module, Radio Antenna: Installation: Capacitor

GC0170609Courtesy of CHRYSLER GROUP, LLC
  1. Engage the mounting tab of the antenna capacitor (5) into the slotted hole in the upper right C-pillar (1).
  2. Install and tighten the screw (6) that secures the antenna capacitor to the C-pillar. Tighten the screw securely.
  3. Reconnect the body wire harness connector (4) to the antenna capacitor.
  4. Reinstall the trim onto the upper right C-pillar. Refer to PANEL, C-PILLAR TRIM, INSTALLATION .
  5. Reconnect the negative cable to the battery. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals