MODULE, Radio FREQUENCY (RF HUB): Installation
NOTE:
Replace and Program the module(s) per the RF-Hub, BCM, PCM FOBik and ELV Replacement and Programming Order Guide. Refer to STANDARD PROCEDURE .
- Position into place and install the Remote Frequency Hub Module (RFHM) and retainers (1).
- Connect the electrical connectors (2).
- If equipped, connect the remote start antenna (3).
- Install the rear shelf cover. Refer to PANEL, REAR SHELF, INSTALLATION .
- Connect the negative battery cable.
NOTE:
Program the RFHM in accordance with the module replacement and programming guide. Refer to STANDARD PROCEDURE .