GEARTRAIN, Planetary: Disassembly

Fig 1: Output Shaft With Center And Rear Planetary Gear Exploded View

Courtesy of CHRYSLER GROUP, LLC

1 - TEFLON RINGS

7 - DRIVING CLUTCH K3

2 - OUTPUT SHAFT WITH CENTER PLANETARY CARRIER

8 - THRUST WASHER

3 - NEEDLE BEARING

9 - AXIAL NEEDLE BEARING

4 - THRUST WASHER

10 - SHIM

5 - REAR PLANETARY GEAR SET

11 - RETAINING RING

6 - REAR HOLLOW SHAFT/FREEWHEELING CLUTCH F2

Remove upper two visible Teflon rings (1) from output shaft.
Remove retaining ring (11), shim (10), thrust needle bearing (9) and thrust washer (8) from output shaft.
Remove clutch K3 (7).
Remove rear tubular shaft/freewheeling clutch F2 (6) from output shaft.
Remove rear gear set (5) with integrated tubular shaft of center gear set from output shaft.
Remove thrust washer (4).