LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Suspension >> Front Suspension & Wheel Alignment >> Front >> Link, Stabilizer Bar >> Installation

Link, Stabilizer Bar: Installation

NOTE:

Installation process is the same for both sides of the vehicle.

GC0170339Courtesy of CHRYSLER GROUP, LLC
  1. Position stabilizer link (4) into position.
  2. Install the stabilizer link to strut nut (1), and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
    GC0170112Courtesy of CHRYSLER GROUP, LLC
  3. Install the stabilizer link to stabilizer bar nut (4), and tighten to the proper torque specifications. Refer to TORQUE SPECIFICATIONS .
  4. Remove the support and lower the vehicle.
scientia non olet · About LEMON Manuals