LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Steering >> Steering Gear >> Steering System >> Pump >> Hose, Power Steering, Return >> Removal >> Gear To Cooler - 6.2L

Gear To Cooler - 6.2L

GC0170514Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the radiator closeout panels.
  3. Loosen the steering gear to cooler hose clamp (1) and remove the steering gear to cooler hose. (5).
  4. Siphon the power steering fluid from the power steering pump reservoir.
  5. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  6. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
    GC0170164Courtesy of CHRYSLER GROUP, LLC
  7. Remove the fastener (2) securing power steering pressure hose (3) and power steering return hose (5) to the engine cradle (1).
    GC0170198Courtesy of CHRYSLER GROUP, LLC
  8. Remove the power steering return hose nut (3) from the steering gear (1) and remove the power steering return hose from the vehicle.
scientia non olet · About LEMON Manuals