LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Heating & Air Conditioning (Service Information) >> Controls >> Module, Power, Blower Motor >> Installation

Module, Power, Blower Motor: Installation

GC0170397Courtesy of CHRYSLER GROUP, LLC
  1. Position the blower motor power module (1) into the HVAC housing (4).
  2. Install the two screws (2) and securely tighten.
  3. Connect the two wire harness connectors (3) to the blower motor power module.
  4. Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals