LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> Heating & Air Conditioning (Service Information) >> Controls >> Sensor, Evaporator Temperature >> Installation

Sensor, Evaporator Temperature: Installation

GC0081016Courtesy of CHRYSLER GROUP, LLC
  1. Position the evaporator temperature sensor (2) into HVAC housing (3).
  2. Connect the HVAC wire harness connector (1) to the evaporator temperature sensor (2).
  3. Install the glove box. Refer to GLOVE BOX, INSTRUMENT PANEL, INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About LEMON Manuals