Floor Console

Courtesy of CHRYSLER GROUP, LLC

NOTE:

Take the proper precautions to protect the face of the floor console end cap from cosmetic damage while performing this procedure.

Position the air outlet (2) onto the floor console end cap (1).
Engage the retaining tabs (3) that secure the air outlet to the trim panel. Make sure the retaining tabs are fully engaged to the outlet.
NOTE:
Make sure that the air outlet is properly aligned to the duct within the floor console and that the foam seal on the duct is properly installed.
Install the console end cap (1) onto the back of the floor console. Refer to CONSOLE, FLOOR, INSTALLATION .
Connect the negative battery cable.