LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 2018 >> Charger Pursuit, 5.7L Eng VIN T, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control >> Evaporative Emissions >> Solenoid, Evaporative Emissions Purge >> Installation >> 6.4L

Solenoid, Evaporative Emissions Purge: Installation: 6.4L

GC0177134Courtesy of CHRYSLER GROUP, LLC
NOTE:

The EVAP purge Solenoid attaches to a bracket near the right rear of the engine. The solenoid will not operate unless it is installed correctly.

  1. Install the EVAP purge solenoid (2) onto the bracket.
  2. Connect the purge line (1) to the EVAP purge solenoid.
  3. Engage the purge hose (4) to the EVAP purge solenoid.
  4. Connect the EVAP purge solenoid wire harness connector (3).
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals